Aaron Parecki

#blackmagicdesign

DeLaVanta Tabor 🎚 Audio Engineer https://twitter.com/delmixedit

Got the #pk1stand from @aaronpk_tv put together and looking good. Definitely looks a lot cooler than just having the ATEM Mini Extreme ISO just sitting on the table.
Shoutout to @inux_3d for much fast shipping than I expected ✊🏾.
-
#blackmagicdesign #atemmini #atemminiextremeiso

Portland, Oregon • 43°F

Fri, Feb 17, 2023 5:06am +00:00 (liked on Fri, Feb 17, 2023 9:27pm -08:00) #pk1stand #blackmagicdesign #atemmini #atemminiextremeiso
It's been just over a year since I launched the first versions of my stands for the ATEM Mini/Extreme, and I'm excited to share the latest models with you, shipping now!

The original design was entirely 3D printed, but our newest version includes aluminum bars so you can mount much heavier monitors and accessories to the top!

They are available in black and white, for both the ATEM Mini and ATEM Mini Extreme! The new design is even easier to assemble with just 4 screws that screw directly into the aluminum bars! The kit comes with cold shoe adapters you can screw into the aluminum to mount accessories like wireless HDMI or microphone receivers.

Available now from our resellers around the world! Yes we can ship (nearly) everywhere! Find your closest reseller at https://pk1.tv!

Portland, Oregon • 43°F

Mon, Apr 11, 2022 7:37pm -07:00 #livestreaming #blackmagicdesign #atemmini #atemminiextreme #streamingrig #pk1stand #streamingsetup
I'm still so excited to be able to offer these custom printed face plates for my #PK1Stand to you for no extra charge!

If you buy the new PK1 Mark II stand during our preorder period, you can add on a face plate with your own text in it for no extra charge! Huge thanks to @yololivtech for sponsoring this deal! It wouldn't be possible without their support!

The YoloBox and the ATEM Mini work great together giving you additional camera angles and audio processing capabilities beyond what the YoloBox can do itself, taking advantage of the YoloBox's all-in-one form factor for livestreaming on the go!

Preorder your PK1 stand today from the link in my bio!

#blackmagicdesign #yolobox #livestreaming #streamingsetup #livestreamer

Portland, Oregon

Thu, Aug 26, 2021 7:09pm -07:00 #pk1stand #blackmagicdesign #yolobox #livestreaming #streamingsetup #livestreamer #pk1
DVE Store https://twitter.com/dvestore

New PK1 Pro ATEM Mini Extreme Stand by @aaronpk 🔥 Now through April 25, 2021 enter code PARECKI at check out and get $15 OFF the Anti-Tilt System & Retaining Clips stand bundle
https://www.dvestore.com/pk1-blackmagic-design-atem-mini-extreme-iso-inux3d-stand-with-anti-tilt-system/

#atemmini #atem #atemminiextreme #blackmagicdesign #blackmagicatemminiextreme

Portland, Oregon • 51°F

Mon, Apr 12, 2021 5:32pm +00:00 (liked on Mon, Apr 12, 2021 10:58am -07:00) #atemmini #atem #atemminiextreme #blackmagicdesign #blackmagicatemminiextreme
I had so much fun designing this #3dprinted ATEM Mini stand, and I'm so excited to be able to offer it for sale as a real life product you can actually buy!

It's available now shipping from the US, UK, or as a downloadable STL file to print yourself! It will soon be available shipping from Australia as well!

Check the link in my bio for more info!

Designed using @shapr3dapp on my iPad, printed on the Prusa Mini+, and distributed by @dvestore, it takes a team!

#blackmagicdesign #atemmini

Portland, Oregon

Fri, Mar 5, 2021 9:06pm -08:00 #3dprinted #blackmagicdesign #atemmini #3d #atem #3dprint #pk1
DVE Store https://twitter.com/dvestore

Tune in next week 01/26/2021 📺 @photojoseph will be bringing in three live guests @aaronpk @tgcallaway @frederickvan via 3 #Blackmagicdesign ATEM Streaming Bridges, mixing in the ATEM 2 M/E & #mimoLive👇
https://youtu.be/HW1-Rx0KkXg
#atemmini #blackmagicatemmini #atemminipro #atem

Portland, Oregon • 45°F

Sat, Jan 23, 2021 12:40am +00:00 (liked on Fri, Jan 22, 2021 5:24pm -08:00) #Blackmagicdesign #mimoLive #atemmini #blackmagicatemmini #atemminipro #atem
I did it, I painted all the rackmount gear white! This is more or less the finished result of my new streaming desk all wired up and functional! I even replaced the fans in the VideoHub so that it's much much quieter.

Thanks to the VideoHub, I can electronically rewire the desk, routing any video source like my computer monitor to any of the displays, and each input on the ATEM Mini is assignable to any video source. The back of this is still a bit of a mess, but my 3D printed converter rack did a decent job of cleaning things up a bit.

The Stream Deck is connected to a Raspberry Pi in the rack so that it's always on even without my computer there. It's rigged up to control the studio and ceiling lights as well as the heater.

#blackmagicdesign #atemmini #deskporn #homeautomation #streamdeck #raspberrypi #livestreaming #streamingrig #overkill

Portland, Oregon

49 likes 3 reposts 16 replies

Fri, Jan 8, 2021 8:20am -08:00 #blackmagicdesign #atemmini #deskporn #homeautomation #streamdeck #raspberrypi #livestreaming #streamingrig #overkill
It's pretty amazing being able to go from an idea in your head to a finished product in just a day.

I've been spending some time learning 3D modeling and 3D printing and designed this modular stackable rack for these #BlackmagicDesign converter boxes.

I've really been enjoying using the 3D modeling software on my iPad to take advantage of the finger gestures for navigation and the Apple Pencil for the actual modeling. It's worked surprisingly better than I was expecting it to, probably because the last time I used any 3D modeling software was like 20 years ago.

Each shelf in the rack is its own piece, so you can stack as many as you want. The top shelf is a special print for the top cover to fit into. The base is slanted 9 degrees so that when this is set on top of my device in the rack mount the stack stands up straight.

#3DPrinting #PrusaMini #Shapr3D

Portland, Oregon

40 likes 10 replies

Sun, Jan 3, 2021 9:15pm -08:00 #blackmagicdesign #3dprinting #prusamini #shapr3d
DVE Store https://twitter.com/dvestore

#ATEMMiniPro Hands-On: First Impressions! 🔥 Join Aaron Parecki today at 10:00am PST for a live Q&A on the #ATEMMini Pro!
Pre-order yours now! https://www.dvestore.com/blackmagic-design-atem-mini-pro-4k/ 👈

https://youtu.be/LkRbHNbYsmQ
#atemminipro #blackmagicdesign #blackmagicatemminipro #blackmagicatemmini #atem

Portland, Oregon • 56°F

Thu, Apr 30, 2020 3:47pm +00:00 (liked on Thu, Apr 30, 2020 9:20am -07:00) #ATEMMiniPro #ATEMMini #atemminipro #blackmagicdesign #blackmagicatemminipro #blackmagicatemmini #atem
All set for my livestream tomorrow morning! My ATEM Mini Pro arrived and I’ve been having lots of fun with it! I'll be answering your questions on the stream, so leave them in the comments below!

📺▶️ https://youtu.be/TDoqwTvutX8

Portland, Oregon • 61°F

54 likes 1 repost 5 replies

Wed, Apr 29, 2020 8:44pm -07:00 #blackmagic #blackmagicdesign #atemmini #atemminipro #videoproduction #video #livestream #workfromhome #livestreaming

older