WeChat ID
aaronpk_tv
-
Philips Hue alternative for “Lamp Stealer” using telnet | Paul Wouters at more then 140 chars (nohats.ca)
Place a bulb of the second starter kit into a socket within 30cm of the bridge from the first starterpack. Telnet to port 30000 of the bridge and type: [Link,Touchlink] The light should blink a few times to acknowledge the hostile takeover.
-
Portland, Oregon • Thu, February 19, 2015 9:16amPicking up prescription -
Ride
2.21miDistance12:05Duration11.0mphAvg SpeedStartEnd
-
AsleepAwake7h 29mSlept33mAwake for
-
Cocktail experiment:
• 2 oz whiskey
• 3/4 oz St. Germain
• 1/2 oz orange liqueur
• bitters -
Ride
2.04miDistance14:51Duration8.2mphAvg SpeedStartEnd
-
Ride
2.25miDistance12:25Duration10.9mphAvg SpeedStartEnd
-
Motor Shaft 8mm to 8mm Joint Helical Beam Coupler Coupling D18L25 (www.amazon.com)
-
6mm to 8mm CNC Stepper Motor Shaft Coupling Coupler for Encoder (www.amazon.com)
-
Internet-Enabled Cat Feeder (www.newtonnet.co.uk)
The torque required to turn the paddle could get quite high, particularly when food starts to get caught which it invariably does. I didn't measure it but it was certainly a fair old force required
-
Remote Pet Feeder : a littleBits Project by littleBits (littlebits.cc)
-
David Bryan's Blog | Raspberry Pi Power Cat Feeder (drstrangelove.net)
-
Blogouillage: DIY Cat feeder v2.0 (www.blogouillage.net)
Bingo, I just finished my cat feeder v2.0 ! No more cereal dispenser, I built everything myself ! I had the choice between different systems, but i chose an archimedes' screw.
-
DIY Cat Feeder and Water Dispenser (www.leeholmes.com)
