60°F

Aaron Parecki

  • Articles
  • Notes
  • Photos
  • Nate https://xoxo.zone/@voiceofunreason   •   Jul 11

    @aaronpk While not much is less appealing than an IOT microwave, _maybe_ one would solve my gripes? Or possibly just create new ones.

    Aaron Parecki
    at this point, my criteria for microwaves is whether I can press the +30s button repeatedly. My current microwave makes you wait 2 seconds after each button press to add 30s at a time and it's infuriating.
    Portland, Oregon • 66°F
    1 reply
    Mon, Jul 10, 2023 8:55pm -07:00
  • Jesse Vincent https://metasocial.com/@jesse   •   Jul 11

    @aaronpk Same! I have had to break out a USB B cable to do network reconfigure a couple times. But Brother seem to actually respect their customers.

    Aaron Parecki
    Ironically the USB-B cable method didn't work today, even when I busted out my windows laptop to run their windows config app. I ended up having to recreate the previous wifi SSID that it was connected to and then I used the web interface to enable the ethernet port again.
    Portland, Oregon • 67°F
    1 like 1 reply
    Mon, Jul 10, 2023 8:43pm -07:00
  • Jesse Vincent https://metasocial.com/@jesse   •   Jul 11

    @aaronpk I still love my Brother laser printer.

    Aaron Parecki
    me too! I've had this HL-2270DW since 2014! I am determined to keep it running!
    Portland, Oregon • 67°F
    1 reply
    Mon, Jul 10, 2023 8:38pm -07:00
  • Mitch https://mastodon.xyz/@mitchkiah   •   Jul 11

    @aaronpk for printers, I always leave set to DHCP and then assign a static IP from the router.

    That way. When it inevitably breaks, there's less to touch in the printer settings (and it's more likely to come back online)

    Aaron Parecki
    My problem was the printer was previously configured for wifi and the ethernet jack was disabled. Still can't believe recreating the wifi SSID was the solution
    Portland, Oregon • 67°F
    Mon, Jul 10, 2023 8:35pm -07:00
  • Nate https://xoxo.zone/@voiceofunreason   •   Jul 11

    @aaronpk I can’t decide who I dislike more. The Product Managers in charge of printers, or microwave ovens.

    Aaron Parecki
    ok right? Why hasn't someone designed a microwave oven that makes sense??
    Portland, Oregon • 67°F
    3 replies
    Mon, Jul 10, 2023 8:33pm -07:00
  • Paul https://techhub.social/@borojetski   •   Jul 11

    @aaronpk I tried using a raspberry pi zero to connect our old printer to the lan. Though it worked, the CUPS drivers were rough, the margins were never right, and it was just miserable. I’ve since been using an old 2007 macbook in clamshell mode with the wan disabled to print share the printer to the network. Other than when ink needs replacing, it’s working surprisingly well.

    Aaron Parecki
    wow that's a real commitment
    Portland, Oregon • 67°F
    Mon, Jul 10, 2023 8:32pm -07:00
  • Joseph Holsten https://mstdn.social/@josephholsten   •   Jul 9

    @aaronpk Lol, I’m trying to talk my partner into it. It doesn’t help that Prusa makes two of the picks on https://www.nytimes.com/wirecutter/reviews/best-home-3d-printer/, and we have a friend who just moved down there.

    Aaron Parecki
    Honestly it's a great printer. My first printer was the Prusa Mini and I had a great experience with it not knowing anything about 3D printing before.
    Portland, Oregon • 75°F
    1 reply
    Sat, Jul 8, 2023 7:03pm -07:00
  • Joseph Holsten https://mstdn.social/@josephholsten   •   Jul 9

    @aaronpk Just confirming: OR, not ME, right?

    One is a slightly longer train ride from Skagit, WA than the other.

    Aaron Parecki
    If you really are coming down from Skagit to pick it up I'll take $100 off the price to cover your train ticket
    Portland, Oregon • 76°F
    1 reply
    Sat, Jul 8, 2023 6:24pm -07:00
  • Joseph Holsten https://mstdn.social/@josephholsten   •   Jul 9

    @aaronpk Just confirming: OR, not ME, right?

    One is a slightly longer train ride from Skagit, WA than the other.

    Aaron Parecki
    haha yes Oregon!
    Portland, Oregon • 76°F
    Sat, Jul 8, 2023 5:38pm -07:00
  • Daniel Supernault https://mastodon.social/@dansup   •   Jul 7

    So close...

    #signInWithMastodon #pixelfed

    Aaron Parecki
    I know you're close with this but I'd love to get you and the Mastodon devs in a room to show you how much better this could be with IndieAuth instead of Mastodon's own OAuth API. That'd also mean you'd instantly support signing in with any other site that supports IndieAuth instead of hardcoding this to Mastodon
    Portland, Oregon, USA • 57°F
    Fri, Jul 7, 2023 6:15am -07:00
  • Alan https://xoxo.zone/@Alanmoo   •   Jul 1

    @aaronpk are you finally getting into that spot you were building?

    Aaron Parecki
    Almost but not quite... temporarily moving in to the small house next door! Here's the whole story https://youtu.be/mP52IoEDyFw
    Portland, Oregon • 62°F
    Sat, Jul 1, 2023 9:10am -07:00
  • Sven Lakemeier https://chaos.social/@sven   •   Jul 1

    @aaronpk doesn't that apply to most things, homemade is better than store bought?

    Aaron Parecki
    Certainly not my bread!
    Portland, Oregon • 62°F
    Sat, Jul 1, 2023 9:08am -07:00
  • Victor Villas https://mastodon.social/@villasbc   •   Jul 1

    @aaronpk Sometimes you need guacamole ASAP and the supermarket avocados are not ripe :-(

    The trick is to always have a batch at hand :-)

    Aaron Parecki
    That is a good trick 👍
    Portland, Oregon • 69°F
    Fri, Jun 30, 2023 10:12pm -07:00
  • https://twitter.com/chrissylee490/status/1670067856132775937?s=12
    Aaron Parecki
    Having been on both sides of this kind of interaction, I can confidently say I agree with both sides. Which means there is a new problem to be solved here...
    Portland, Oregon • 56°F
    Sat, Jun 17, 2023 10:07pm -07:00
  • https://twitter.com/vibronet/status/1669899132578983937?s=12
    Aaron Parecki
    wow I got 50% masculine and 28% feminine, I wonder what the rest is
    Portland, Oregon • 65°F
    Fri, Jun 16, 2023 9:52pm -07:00
  • Brandon Kraft ❤️‍🔥🧡 https://religious.social/@kraft   •   Jun 17

    @aaronpk Same-ish. My Gvoice is what I give out to everyone besides family and legit friends that I'd actually answer a call from.

    Aaron Parecki
    Update: all these comments coming in pushed me over the edge, I just got a new number to use with my phone for iMessage with trusted contacts. I'll keep my GV number as my public number.
    Portland, Oregon • 67°F
    Fri, Jun 16, 2023 9:08pm -07:00
  • Brandon Kraft ❤️‍🔥🧡 https://religious.social/@kraft   •   Jun 17

    @aaronpk Same-ish. My Gvoice is what I give out to everyone besides family and legit friends that I'd actually answer a call from.

    Aaron Parecki
    Right now it's legit my only phone number, but I'm getting to the point where it's annoying that I can't activate iMessage on it. I'm seriously considering moving to a real SIM, but can't decide if I should port my GV number or start from scratch
    Portland, Oregon • 68°F
    Fri, Jun 16, 2023 8:50pm -07:00
  • peroty https://micro.blog/peroty   •   Jun 17

    @aaronpk Did the link also take you to a broken page?

    Aaron Parecki
    It took me to a page where the most recent photo was from 2013 which I guess explains why I have no idea what this is
    Portland, Oregon • 68°F
    Fri, Jun 16, 2023 8:37pm -07:00
  • Brandon Kraft ❤️‍🔥🧡 https://religious.social/@kraft   •   Jun 17

    @aaronpk about the same. Seems like the only time I used it was a span where I used my Google voice number as a primary SMS number back when that was powered through Hangouts.

    Aaron Parecki
    Oh no, my primary phone number is still google voice, and I'm just waiting for the day where they shut that down. Should probably deal with that sooner than later 😬
    Portland, Oregon • 69°F
    1 reply
    Fri, Jun 16, 2023 8:34pm -07:00
  • Aaron Parecki https://aaronparecki.com/   •   Jun 16
    Congrats Google, you have written one of the most vague and unhelpful shutdown emails ever, yet somehow I am not surprised.
    Aaron Parecki
    Update: it turns out the most recent content I have in whatever this is is from 2013
    Portland, Oregon, USA • 70°F
    1 reply
    Fri, Jun 16, 2023 8:08pm -07:00
older

Hi, I'm Aaron Parecki, Director of Identity Standards at Okta, and co-founder of IndieWebCamp. I maintain oauth.net, write and consult about OAuth, and participate in the OAuth Working Group at the IETF. I also help people learn about video production and livestreaming. (detailed bio)

I've been tracking my location since 2008 and I wrote 100 songs in 100 days. I've spoken at conferences around the world about owning your data, OAuth, quantified self, and explained why R is a vowel. Read more.

  • Director of Identity Standards at Okta
  • IndieWebCamp Founder
  • OAuth WG Editor
  • OpenID Board Member

  • 🎥 YouTube Tutorials and Reviews
  • 🏠 We're building a triplex!
  • ⭐️ Life Stack
  • ⚙️ Home Automation
  • All
  • Articles
  • Bookmarks
  • Notes
  • Photos
  • Replies
  • Reviews
  • Trips
  • Videos
  • Contact
© 1999-2025 by Aaron Parecki. Powered by p3k. This site supports Webmention.
Except where otherwise noted, text content on this site is licensed under a Creative Commons Attribution 3.0 License.
IndieWebCamp Microformats Webmention W3C HTML5 Creative Commons
WeChat ID
aaronpk_tv