Excellent! What'd you end up using to record the stream then? • Aaron Parecki

Edward Robinson https://twitter.com/_edwardrobinson • Feb 14
@aaronparecki Hey I was in your live stream today and I had the ?regarding using the usb out on the Atem mini to record and also stream to obs at the same time using the BM stream bridge. Just want to let u know I got it to work and I can share the info with u if u would like.

Excellent! What'd you end up using to record the stream then?

Portland, Oregon • 30°F

Sun, Feb 14, 2021 1:02pm -08:00

6 replies
Have you written a response to this? Let me know the URL:
- Edward Robinson twitter.com/_edwardrobinson
  
  Lol… yep I checked multiview is there like you said. Yeah I hope Blackmagic Design gives us those 2 USB ports as well. That would be huge. I’ll definitely attend your livestream after the event is over tomorrow. Thanks again Aaron.
  
  Sun, Feb 14, 2021 10:29pm +00:00 (via brid.gy)
- Aaron Parecki twitter.com/aaronpk
  
  oh right I misspoke, multiview out of the ATEM is available, the only downside with this is the delay from the bridge. Crossing my fingers for a new ATEM Mini on Wednesday with two USB ports to solve this tho!
  
  Sun, Feb 14, 2021 10:05pm +00:00 (via brid.gy)
- Edward Robinson twitter.com/_edwardrobinson
  
  Yeah there is about a 1 sec delay in the feed going into obs.. hopefully by networking everything I can still get multi view along with everything else. BTW thank you for all you do by sharing your knowledge of Blackmagic products. You are the best bro
  
  Sun, Feb 14, 2021 9:48pm +00:00 (via brid.gy)
- Aaron Parecki twitter.com/aaronpk
  
  oh sure, that works. It's always a tradeoff of something though. You lose the multiview in that setup, and OBS is delayed by the streaming bridge delay. Should work fine going over the LAN instead of a direct ethernet connection too.
  
  Sun, Feb 14, 2021 9:40pm +00:00 (via brid.gy)
- Edward Robinson twitter.com/_edwardrobinson
  
  Later I’m going see if I can do this all on network so I don’t lose access to Atem software control access
  
  Sun, Feb 14, 2021 9:39pm +00:00 (via brid.gy)
- Edward Robinson twitter.com/_edwardrobinson
  
  The Atem mini Iso usb out with my sandisk 1TB SSD. The key is connecting the Ethernet cord from the Atem mini to the Ethernet port of the bridge and going hdmi out on the bridge to a capture card to PC. You have go "on air" on the Atem mini. Now you are recording and feeding obs
  
  Sun, Feb 14, 2021 9:34pm +00:00 (via brid.gy)

Posted in /replies using monocle.p3k.io