I should also ask, is your audio coming from the camera or from ... • Aaron Parecki

ZAKtalks TECH 🇨🇦 #ZAKpack #TeamUnFiltered https://twitter.com/ZAKtalksTECH • Feb 15
Appreciate the reply, Aaron.

- The USB-C cable I'm using is about a 1.5 ft and also a fast USB-C cable.
- I'm using a 2017 MacBook Pro w/ 3.1 GHz Quad-Core Intel Core i7 and 16GB of RAM.
- I still need to test with OBS virtual cam and see if I can adjust within there.

I should also ask, is your audio coming from the camera or from the 1/8” jack on the ATEM? The camera’s HDMI feed will always be delayed, and you can tweak up to 8 frames of delay in the ATEM itself to compensate.

Portland, Oregon • 31°F

Sun, Feb 14, 2021 6:57pm -08:00

11 replies
Have you written a response to this? Let me know the URL:
- Aaron Parecki twitter.com/aaronpk
  
  well best of luck! Blackmagic support is very nice and happy to help with stuff too!
  
  Mon, Feb 15, 2021 3:52am +00:00 (via brid.gy)
- ZAKtalks TECH 🇨🇦 #ZAKpack #TeamUnFiltered twitter.com/ZAKtalksTECH
  
  I appreciate your time. 🤜💥🤛
  
  Mon, Feb 15, 2021 3:40am +00:00 (via brid.gy)
- ZAKtalks TECH 🇨🇦 #ZAKpack #TeamUnFiltered twitter.com/ZAKtalksTECH
  
  Oh yah. I've been working on this all day. I've tried all types of configurations. On. Off. I actually caught some of your livestream today. Next steps are to try OBS and do a delay through that. At least I have a sync now with the Cam Link. Just wish I could use the USB-C.
  
  Mon, Feb 15, 2021 3:39am +00:00 (via brid.gy)
- Aaron Parecki twitter.com/aaronpk
  
  That definitely should work. Did you double check the mic vs line setting in the ATEM config for that input?
  
  Mon, Feb 15, 2021 3:37am +00:00 (via brid.gy)
- ZAKtalks TECH 🇨🇦 #ZAKpack #TeamUnFiltered twitter.com/ZAKtalksTECH
  
  I tried that, even with the 2i2 plugged into the computer. The Atem didn't register or find it via the 1/4 to 1/8 cables. I'm really beginning to think I have a bad Atem unit. I'll be contacting Black Magic tomorrow. Maybe even an exchange with B&H.
  
  Mon, Feb 15, 2021 3:32am +00:00 (via brid.gy)
- Aaron Parecki twitter.com/aaronpk
  
  oh funny, but that shouldn’t matter, run the line outs into the ATEM anyway, or does it not even have a way to pass its input to the line output? I coulda sworn it did but it’s been a few years since I’ve used a Scarlett device
  
  Mon, Feb 15, 2021 3:26am +00:00 (via brid.gy)
- ZAKtalks TECH 🇨🇦 #ZAKpack #TeamUnFiltered twitter.com/ZAKtalksTECH
  
  The 2i2 doesn't have a standalone mode for power. It's dependent on the USB power to/from a computer. I can't even run the existing cable into a power adapter. It HAS to go into a computer. Focusrite did outline units that have standalone power: support.focusrite.com/hc/en-gb/artic…
  
  Mon, Feb 15, 2021 3:24am +00:00 (via brid.gy)
- Aaron Parecki twitter.com/aaronpk
  
  What didn’t work about running the 2i2 line out into the ATEM Mini? That shouldn’t be a problem.
  
  Mon, Feb 15, 2021 3:17am +00:00 (via brid.gy)
- ZAKtalks TECH 🇨🇦 #ZAKpack #TeamUnFiltered twitter.com/ZAKtalksTECH
  
  I agree. But I can't do that with the Focusrite 2i2. I would need to look at getting a new interface to go into the Atem.
  
  Mon, Feb 15, 2021 3:15am +00:00 (via brid.gy)
- Aaron Parecki twitter.com/aaronpk
  
  aha, I would’t trust the computer to be able to bring the two in sync, it’ll be more reliable to run the audio into the ATEM, then you ensure the audio and video are in sync before they reach the computer. (In case it’s not clear, I don’t trust computers for anything realtime)
  
  Mon, Feb 15, 2021 3:08am +00:00 (via brid.gy)
- ZAKtalks TECH 🇨🇦 #ZAKpack #TeamUnFiltered twitter.com/ZAKtalksTECH
  
  Audio is via Rode Procaster into a Focusrite Scarlett 2i2 that does DIRECTLY into the MacBook Pro. Audio does not go into the Atem Mini. I can't power the Focusrite 2i2 without it being plugged directly into the MacBook Pro. Tried that today ⤵️ https://t.co/i4JTc7ZKLN
  
  Mon, Feb 15, 2021 3:03am +00:00 (via brid.gy)

Posted in /replies using monocle.p3k.io